A [Features] 1, energy: a, 50% energy than traditional fluorescent lamp, energy-efficient than incandescent 90%; b, 18W LED lamp equivalent to 40W traditional fluorescent lamp luminous flux, luminous flux is equivalent to 150W incandescent lamp. c, the same luminous flux conditions, LED illumination is effectively doubled the traditional fluorescent lamp. (Reason: LED light for the one-way, multi-directional traditional fluorescent light) 2, environmental protection and safety: Aluminum and plastic components using PC, do not contain mercury and other toxic substances and recyclable utilization 98.5%. Without causing any harm. 3, built-in power supply: The use of isolated power program, and more secure. 4, personalization options: a, through the mask option: transparent stripes (light transmission rate of up to 90%) or extended mask (soft light, no glare, light transmission rate up to 80%); b, color temperature options: white (6000k ± 300k), natural white (4000k ± 300k) 5, good thermal conductivity, the effective lamp life guarantee 1, the use of SMD LED as light source, longer than the plug-in LED 2, the aluminum plate as the heat LED PCB, FR4 material PCB heat better than several times. 3, high thermal conductivity aluminum shell as a heat sink, thermal conductivity better than the PC case several times. Second, [Product applications] Completely replace the traditional fluorescent tube; Office buildings, shopping malls, supermarkets, schools, hospitals, hotels, car parks, urban underground channel, factory floor, municipal engineering, family and other lighting. Three 【Technical Parameters】 1, the parameter table No Item Specifications 1 input voltage range AC 100-240V 2 Output power (W) 20 3 LED Quantity (PCS) 196 4 LED Type 3014 Package 5 luminous flux (lm) 1400-1500 6 Operating Temperature (° C) -10 ℃ ~ 45 ℃ 7 temperature (° C) <30 ℃ 8 products maximum size (mm) Φ26 * 1198 ± 1 9 color temperature K 4000-6000 10 luminous efficiency ≥ 70Lm / W Fourth, the [product naming] Such as the T8-20CS196-15S-W, said T8 models T 8-2 0 C S1 9 6-15S-W 12,345,678 1, the size of T5, T8, T10 2, power 20W 3, the voltage code: A (low voltage DC 12-24V) B (low-voltage AC 24V) C (AC 100-240V) 4, light source type 5, LED quantity 6, case number 7, shell color 8, light color V. 【Product Size】
Installation instructions: 1, remove the starter and the rectifier, the electricity of FireWire, zero line, respectively, then the left and right ends of the stent. 2, LED lamp is built-in power supply, G13 interface, two pins to short-circuit state, both ends of the connector are the same. VII PRECAUTIONS 1, in normal lighting, avoid direct contact with aluminum surface fluorescent! 2, after prolonged use (eg one year), according to the amount of tube surface dust, the need for lamp cleaning, cleaning heat better and live longer. When cleaning with the blower blowing or dry cloth, to avoid the liquid into the tube. 3, different types of LED fluorescent tube the required current, voltage difference, if the LED lamp failure, the need to replace the same brand of the same type of LED fluorescent tube. 4, LED fluorescent tube without extra accessories, removable non-professionals do not repair. 5, such as product upgrades to change without notice. |